Main structure and parameters
Foshan Yali Magnetic Box is made of high-performance permanent magnet material, which generates strong suction force in the magnetic circuit. With the strengthening and shielding effect of the control magnetic box on the internal magnetic block, the magnetic block is in operation
Or off state, no external power supply required. When the magnetic box is in working condition, the suction surface at the bottom of the magnetic block tightly adheres to the precast concrete production platform and firmly holds it; When levering up a magnetic block
Most of the magnetic force is controlled by the shielding of the magnetic box, and the bottom magnetic force is greatly reduced. It can be easily removed from the platform by hand.
Usage method
(1) There is a magnetic control rod (magnetic switch) on top of the magnetic box. Place the magnetic box on the platform, press the switch, and the magnetic box firmly attracts the platform and is in working state; Use a lever to pry up the switch and magnetic box
The suction of the platform is greatly reduced, and the magnetic box is in a closed state, allowing for the movement of the magnetic box. (2) The thickness and surface smoothness of the platform will affect the suction force between the magnetic box and the platform. The thicker the platform, the more the surface
The flatter the surface, the greater the suction, and the lateral shear force is related to the magnetic box suction and the friction coefficient of the contact surface. (3) There are two fixing screws at both ends of the magnetic box, which can be connected to different fixtures to secure
Define edge molds with different shapes and structures, such as angle steel, channel steel edge molds, etc. (4) The Benhaocheng magnetic box uses permanent strong magnets, which do not exceed the maximum operating temperature and do not damage the front of the rusted magnet itself
By the way, theoretically, magnetic force can be permanently maintained. (5) The environmental conditions for using the Yali magnetic box are: 1. The ambient temperature is not greater than 80 degrees Celsius. 2. The surrounding medium is free of corrosive metal agents.
Maintenance and safety instructions
(1) During the use of the magnetic box, it is important to prevent deformation or even damage to the magnet caused by hard tools hitting or colliding with it, in order to avoid affecting its performance. If tools are necessary, it is recommended
Gently tap with a rubber hammer.
(2) The platform for using the magnetic box should be kept clean and flat to prevent iron filings or concrete slurry from entering the interior of the magnetic box. This will affect the flexibility of the switch and may cause the magnetic block to tilt and not be flat
Whole fitting platform to reduce work suction.
(3) The magnetic force on the suction surface of the magnetic box is very strong, and it should be avoided to approach precision instruments, electronic instruments, and other devices that are easily affected by magnetic force. At the same time, it should not be close to other iron materials. Once adsorbed,
It's difficult to separate. It is recommended to create a dedicated toolbox to place magnetic boxes and other magnetic retainers.
(4) The suction surface of the magnetic box should always be kept clean and flat. If not used for a long time, the suction surface should be coated with oil to prevent rust.